{"id":338,"date":"2014-03-13T13:55:05","date_gmt":"2014-03-13T11:55:05","guid":{"rendered":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/?page_id=338"},"modified":"2016-11-26T21:25:17","modified_gmt":"2016-11-26T19:25:17","slug":"diseminare","status":"publish","type":"page","link":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/?page_id=338&lang=ro","title":{"rendered":"Diseminare"},"content":{"rendered":"

Articole publicate<\/i><\/b><\/h2>\n

 <\/p>\n

    \n
  1. Bogdan Pricop, Umut S\u00f6yler, Burak \u00d6zkal, Nicoleta Monica Lohan, Adrian Liviu Paraschiv, Marius Gabriel Suru and Leandru-Gheorghe Bujoreanu, Influence of mechanical alloying on the behavior of Fe-Mn-Si-Cr-Ni shape memory alloys made by powder metallurgy, Materials Science Forum Vols. 738-739 (2013) pp 237-241, ISSN 1662-9752, FACTOR DE IMPACT (FI<\/em><\/strong>): 0,399<\/em><\/strong><\/li>\n
  2. P. SPIRIDON, B. PRICOP, M. G. SURU, A. L. PARASCHIV, N. M. LOHAN, L-G. BUJOREANU, The influence of heat treatment atmosphere and maintaining period on the homogeneity degree of a Fe-Mn-Si-Cr-Ni shape memory alloy obtained through powder metallurgy<\/em>, Journal of Optoelectronics and Advanced Materials 15(7-8), 2013, pp. 730 \u2013 733, FI: 0,516<\/em><\/strong>.<\/li>\n
  3. -L. PARASCHIV, F. BORZA, N. LUPU, M.-G. SURU, N. M. LOHAN, B. PRICOP, I.-P. SPIRIDON, L.-G. BUJOREANU, On some structural characteristics of Fe-base shape memory alloys<\/em>, Journal of Optoelectronics and Advanced Materials 15(7-8), 2013, pp. 781 \u2013 784, FI: 0,516<\/em><\/strong>.<\/li>\n
  4. Leandru-Gheorghe Bujoreanu, Nicoleta Monica Lohan, Bogdan Pricop, Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Nicanor Cimpoe\u0219u, Gigi Vitel, Gheorghe Gur\u0103u, Atomic migration variation as an effect of thermomechanical cycling in shape memory actuators<\/em>, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 3-4. asminternational.org<\/a><\/li>\n
  5. Nicoleta-Monica Lohan, Bogdan Pricop, Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Leandru-Gheorghe Bujoreanu, Cooling rate effects on the structure and transformation behavior of Cu-Zn-Al shape memory alloys subjected to differential scanning calorimetry analysis, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 21-22, asminternational.org<\/a><\/li>\n
  6. Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Nicoleta Monica Lohan, Bogdan Pricop, Leandru-Gheorghe Bujoreanu, Firu\u021ba Borza, Nicoleta Lupu, Factors influencing the structure and proprieties of polycrystalline magnetic Fe-Ni-Co-Al-Ta-B shape memory alloys, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 27-28, asminternational.org<\/a><\/li>\n
  7. Carmela Gurau, Gheorghe Gurau, Leandru-Gheorghe Bujoreanu, High Pressure Torsion effects on Shape Memory behavior of Fe-Mn-Si-Cr alloys Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 65-66, asminternational.org<\/a><\/li>\n
  8. Gurau, C. Gurau, O. Potecasu, P. Alexandru, High speed HPT technology for obtaining Fe-Mn-Si-Cr active elements, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 67-68, www.asminternational.org<\/a><\/li>\n
  9. Bogdan Pricop, Nicoleta Monica Lohan, Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Leandru-Gheorghe Bujoreanu, Burak \u00d6zkal, Umut S\u00f6yler, Jan Van Humbeeck, Influence of mechanically alloyed fraction and hot rolling temperature on the structure of Fe-14Mn-6Si-9Cr-5Ni (mass. %) shape memory alloys processed by powder metallurgy, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 85-86, asminternational.org<\/a><\/li>\n
  10. Marius-Gabriel Suru, Adrian-Liviu Paraschiv, Nicoleta Monica Lohan, Bogdan Pricop, Leandru-Gheorghe Bujoreanu, Burak Ozkal, Loading mode and alloy system effects on surface relief characteristics of martensite plates in Cu-based SMAs, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, May 20\u201324, 2013, Prague, Czech Republic, pp. 366-367, asminternational.org<\/a><\/li>\n
  11. L. PARASCHIV, F. BORZA, M.-G. SURU, B. PRICOP, I. P. SPIRIDON, E. MIHALACHE, L.-G. BUJOREANU, Chemical composition and processing effects on the pseudoelastic response of \u03b1\u2019 ferromagnetic martensite, Optoelectronics and Advanced Materials \u2013 Rapid Communications, 7(11-12), 2013, pp., FI: 0,402<\/em><\/strong><\/li>\n
  12. -G. Suru, I. Dan, N. M. Lohan, A. L. Paraschiv, B. Pricop, I. P. Spiridon, C. Baciu, L.-G. Bujoreanu, Effects of hot working procedure on surface relief characteristic in an Fe\u2013Mn\u2013Si\u2013Cr shape memory alloy<\/em>, Materialwissenschaft und Werkstofftechnik, 45(1), 2014, pp. 44\u201350, ISSN 0933-5137, FI: 0,425<\/em><\/strong><\/li>\n
  13. Gur\u0103u, C. Gur\u0103u, F. M. Braz Fernandes, L. G. Bujoreanu, An Experimental Study on the Response of Equal Channel Angular Pressed Aluminum Subjected to Cold Rolling<\/em>, Indian Journal of Engineering and Materials Sciences, Vol 21(3), 2014, pp. 253-258, ISSN 0971-4588, FI: 0,413<\/em><\/strong><\/li>\n
  14. GUR\u0102U, Gheorghe, GUR\u0102U, Marlen, POTECA\u0218U, Octavian, ALEXANDRU, Petric\u0103, Bujoreanu, Leandru, Novel high speed high pressure torsion technology for obtaining Fe-Mn-Si-Cr shape memory alloy active elements<\/em>, Journal of Materials Engineering and Performance, 23(7), 2014, pp. 2396-2402, ISSN 1059-9495, FI: 0,998<\/em><\/strong><\/li>\n
  15. Marius-Gabriel Suru, Adrian-Liviu Paraschiv, Nicoleta Monica Lohan, Bogdan Pricop, Burak Ozkal, Leandru-Gheorghe Bujoreanu, Loading Mode and Environment Effects on Surface Profile Characteristics of Martensite Plates in Cu-Based SMAs<\/em>, Journal of Materials Engineering and Performance, 23(7), 2014, pp. 2669-2676, ISSN 1059-9495, FI: 0,998<\/em><\/strong><\/li>\n
  16. Gurau, P. Alexanu, L. Gurau, V. Musat, A comparison of the structure and properties of HSLA steel cold rolled and severe plastic deformed by high speed high pressure torsion<\/em>, DOI: 10.5593\/SGEM2014\/B61\/S24.001 (Papers SGEM2014), Wednesday 1 October 2014 by Libadmin2014, References: 14th SGEM GeoConference on Nano, Bio And Green \u2013 Technologies For A Sustainable Future, www.sgem.org, SGEM2014 Conference Proceedings, ISBN 978-619-7105-20-9 \/ ISSN 1314-2704, June 19-25, 2014, Vol. 1, pp. 3-10<\/li>\n
  17. Gurau, G. Gurau, F. M. B. Fernandes, Effect of severe ausforming on the shape memory microstructure of a copper based alloy<\/em>, DOI: 10.5593\/SGEM2014\/B61\/S24.009, (Papers SGEM2014), Wednesday 1 October 2014 by Libadmin2014, References: 14th SGEM GeoConference on Nano, Bio And Green \u2013 Technologies For A Sustainable Future, www.sgem.org, SGEM2014 Conference Proceedings, ISBN 978-619-7105-20-9 \/ ISSN 1314-2704, June 19-25, 2014, Vol. 1, pp 61-68<\/li>\n
  18. Gurau, C. Gurau, L. Bujoreanu, F. M. B. Fernandes, High speed high pressure torsion effects on a difficult deformable shape memory alloy<\/em>, DOI: 10.5593\/SGEM2014\/B61\/S24.013,<\/strong> (Papers SGEM2014), Wednesday 1 October 2014 by Libadmin2014, References: 14th SGEM GeoConference on Nano, Bio And Green \u2013 Technologies For A Sustainable Future, www.sgem.org, SGEM2014 Conference Proceedings, ISBN 978-619-7105-20-9 \/ ISSN 1314-2704, June 19-25, 2014, Vol. 1, pp 93-100<\/li>\n
  19. Gurau, G. Gurau, F. Potecasu, The long term corrosion behavior of a shape memory alloy in seawater subjected to various plastic deformation processes<\/em>, DOI: 10.5593\/SGEM2014\/B61\/S24.024, (Papers SGEM2014), 14th SGEM GeoConference on Nano, Bio And Green \u2013 Technologies For A Sustainable Future, www.sgem.org, SGEM2014 Conference Proceedings, ISBN 978-619-7105-20-9 \/ ISSN 1314-2704, June 19-25, 2014, Vol. 1, pp 173-180.<\/li>\n
  20. Leandru-Gheorghe BUJOREANU, Gheorghe GURAU, Radu-Ioachim COMANECI, Burak OZKAL, Elena MIHALACHE, Particular aspects of constrained recovery shape memory effect in a severely plastic deformed Fe-Mn-Si-Cr alloy<\/em>, 17th<\/sup> International Metallurgy & Materials, IMMC 2014, Istanbul, Turkey, 11-13 September, 2014, pp. 434-441<\/li>\n
  21. M-G. Suru, N.M. Lohan, B. Pricop, I.P. Spiridon, E. Mihalache, R.I. Com\u0103neci and L-G. Bujoreanu, Structural effects of high-temperature plastic deformation process on martensite plate morphology in a Fe-Mn-Si-Cr SMA<\/em>, International Journal of Materials and Product Technology, Vol. 50, Nos. 3\/4, 2015, pp. 276-288, ISSN 0268-1900, FI: 0,365<\/em><\/strong><\/li>\n
  22. Gheorghe Gur\u0103u, Leandru G. Bujoreanu, Carmela Gur\u0103u, Radu I. Com\u0103neci, Nicoleta M. Lohan, Bogdan Pricop, Marius G. Suru, Superelastic-like response obtained at Fe-Mn-Si-Cr shape memory alloys processed by high-speed high pressure torsion<\/em>, International Journal of Modern Manufacturing Technologies, Vol. VII, No. 1, pp. 23-37, 2015, ISSN 2067\u20133604, http:\/\/modtech.ro\/international-journal\/international-journal-ijmmt.php?volume=vol7no12015 indexat\u0103 \u00een Scopus, INSPEC, Index Copernicus, Google Scholar<\/li>\n
  23. G. BUJOREANU, Development of shape memory and superelastic applications of some experimental alloys<\/em>, Journal of Optoelectronics and Advanced Materials, 17(9-10), 2015, pp. 1437-1443, ISSN 1454-4164, FI: 0,429<\/em><\/strong><\/li>\n
  24. Gur\u0103u, C. Gur\u0103u, F. M. B. Fernandes, L. G. Bujoreanu, Effect of High Speed High Pressure Torsion parameters on grain refinement of coned shape Fe based Shape Memory Alloy active elements, Materials Today: Proceedings, 2(S3), 2015, pp. S897 \u2013 S900, ISSN: 2214-7853, d.o.i. 10.1016\/j.matpr.2015.07.426<\/li>\n
  25. Gur\u0103u, G. Gur\u0103u, L. G. Bujoreanu, F. M. B. Fernandes, A comparative study of austenitic structure in NiTi and Fe based shape memory alloys after severe plastic deformation, Materials Today: Proceedings, 2(3), 2015, pp. S905 \u2013 S908, ISSN: 2214-7853, d.o.i. 10.1016\/j.matpr.2015.07.428<\/li>\n
  26. Leandru-Gheorghe Bujoreanu, Viorel Goan\u021b\u0103, Nicanor Cimpoe\u0219u, Carmela Gur\u0103u, Marius-Gabriel Suru, Elena Mihalache and Gheorghe Gur\u0103u, Hardness-gradient reversion in FeMnSiCr shape memory alloy modules produced by high-speed high pressure torsion, MATEC Web of Conferences, 33, 04001(2015), DOI 10.1051\/matecconf\/20153304001.<\/li>\n
  27. Gheorghe Gurau, Carmela Gurau and V Sampath, Investigation of microhardness evolution in an ultrafine grained NiTi alloy formed via high speed high pressure torsion (HSHPT), MATEC Web of Conferences, 33, 03003(2015), DOI 10.1051\/matecconf\/20153303003.<\/li>\n
  28. Carmela Gurau, Gheorghe Gurau, V Sampath and Viorica Musat, Effects of HSHPT on the martensitic transformation behaviour of an NiTi alloy, MATEC Web of Conferences, 33, 03007(2015), DOI 10.1051\/matecconf\/20153303007.<\/li>\n
  29. Gheorghe GURAU, Carmela GURAU, Vedamanickam SAMPATH, and Leandru Gheorghe BUJOREANU, Investigations of a nanostructured FeMnSi shape memory alloy produced via severe plastic deformation<\/em>, International Journal of Minerals, Metallurgy and Materials, Volume 23, Number 11, November 2016, pp 1315-1322, DOI: 10.1007\/s12613-016-0000-0, FI: 0,882<\/em><\/strong><\/li>\n
  30. Mihalache, B. Pricop, N.-M. Lohan, M.-G. Suru, B. Ozkal, L.-G. Bujoreanu, Internal friction evaluation in mechanically alloyed-powder metallurgy Fe-Mn-Si-Cr-Ni shape memory alloys, International Journal of Modern Manufacturing Technologies, Vol. VIII, No. 1(2016), 61-68, ISSN 2067\u20133604.<\/li>\n<\/ol>\n

     <\/p>\n

    Particip\u0103ri la conferin\u021be<\/i><\/b><\/h2>\n

     <\/p>\n

      \n
    1. Bogdan Pricop, Umut S\u00f6yler, Burak \u00d6zkal, Nicoleta Monica Lohan, Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Leandru-Gheorghe Bujoreanu, Influence of mechanical alloying on the behavior of Fe-Mn-Si-Cr-Ni shape memory alloys made by powder metallurgy<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la 9th European Symposium on Martensitic Transformations, ESOMAT 2012, 9-16, September, 2012, Saint-Petersburg, Russia.<\/li>\n
    2. Marius-Gabriel SURU, Burak \u00d6ZKAl, Leandru-Gheorghe BUJOREANU, Surface relief particularities in shape memory alloys, prezentare sub form\u0103 de poster<\/strong><\/em> la 16th International Metallurgy & Materials Congress, IMMC 2012, 13-15 September, Istanbul, Tukey.<\/li>\n
    3. Adrian-Liviu PARASCHIV, Burak \u00d6zkal, Leandru-Gheorghe BUJOREANU, Chemical composition and thermomechanical processing effects in Fe-Cr base shape memory alloys, prezentare sub form\u0103 de poster<\/strong><\/em> la 16th International Metallurgy & Materials Congress, IMMC 2012, 13-15 September, Istanbul, Tukey.<\/li>\n
    4. -L. Paraschiv, F. Borza, N. Lupu, M.-G. Suru, N. M. Lohan, B. Pricop, I.-P. Spiridon, L.-G. Bujoreanu, On some structural characteristics of Fe-base shape memory alloys,<\/em> prezentare sub form\u0103 de poster<\/em><\/strong> la 8th International Conference on Materials Science & Engineering \u2013 BraMat 2013, 28 February-2 March 2013, Bra\u0219ov, Romania.<\/li>\n
    5. P. Spiridon, B. Pricop, M. G. Suru, A. L. Paraschiv, N. M. Lohan, L-G. Bujoreanu, The influence of heat treatment atmosphere and maintaining period on the homogeneity degree of a Fe-Mn-Si-Cr-Ni shape memory alloy obtained through powder metallurgy<\/em>,<\/em> prezentare sub form\u0103 de poster<\/em><\/strong> la 8th International Conference on Materials Science & Engineering \u2013 BraMat 2013, 28 February-2 March 2013, Bra\u0219ov, Romania.<\/li>\n
    6. -G. Suru, N. M. Lohan, A. L. Paraschiv, B. Pricop, I. P. Spiridon, C. Baciu, L-G. Bujoreanu, Hot working effects on surface relief characteristics in a Fe-Mn-Si-Cr SMA<\/em>,<\/em> prezentare sub form\u0103 de poster<\/em><\/strong> la 8th International Conference on Materials Science & Engineering \u2013 BraMat 2013, 28 February-2 March 2013, Bra\u0219ov, Romania.<\/li>\n
    7. Leandru-Gheorghe Bujoreanu, Iulia Petru\u021ba Spiridon, Marius-Gabriel Suru, Gigi Vitel, Adrian-Liviu Paraschiv, Bogdan Pricop, Nicoleta Monica Lohan, Bogdan Istrate, Gheorghe Gur\u0103u, Atomic migration intensification as an effect of thermomechanical cycling in shape memory actuators<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Shape Memory and Superelastic Technologies (SMST 2013) May 20-24 Prague, Czech Republic, 20-24 May Prague, Czech Republic.<\/li>\n
    8. Adrian-Liviu Paraschiv, Firu\u021ba Borza, Nicoleta Lupu, Marius-Gabriel Suru, Nicoleta Monica Lohan, Bogdan Pricop, Burak \u04e6zkal, Leandru-Gheorghe Bujoreanu, Factors influencing the structures and proprieties of polycrystalline magnetic Fe-Ni-Co-Al-Ta-B shape memory alloys<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Shape Memory and Superelastic Technologies (SMST 2013) May 20-24 Prague, Czech Republic, 20-24 May Prague, Czech Republic.<\/li>\n
    9. Marius-Gabriel Suru, Adrian-Liviu Paraschiv, Nicoleta Monica Lohan, Bogdan Pricop, Burak Ozkal, Leandru-Gheorghe Bujoreanu, Loading mode and environment effects on surface relief characteristics of martensite plates in Cu-based SMAs<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Shape Memory and Superelastic Technologies (SMST 2013) May 20-24 Prague, Czech Republic, 20-24 May Prague, Czech Republic.<\/li>\n
    10. Carmela Gurau, Gheorghe Gurau, Leandru\u2010Gheorghe Bujoreanu, High pressure torsion effects on shape memory behavior of Fe-Mn-Si-Cr alloys<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Shape Memory and Superelastic Technologies (SMST 2013) May 20-24 Prague, Czech Republic, 20-24 May Prague, Czech Republic.<\/li>\n
    11. Gheorghe Gurau, Carmela Gurau, Octavian Potecasu, Petrica Alexandru, High speed HPT technology for obtaining Fe-Mn-Si-Cr active elements<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Shape Memory and Superelastic Technologies (SMST 2013) May 20-24 Prague, Czech Republic, 20-24 May Prague, Czech Republic.<\/li>\n
    12. G.Bujoreanu, Particular aspects concerning the manufacturing and testing of experimental applications of shape memory alloys and the development of new research directions<\/em>, prezentare oral\u0103<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2013, 27-29 Iunie, Sinaia, Romania.<\/li>\n
    13. -G. SURU, N. M. LOHAN, A. L. PARASCHIV, B. PRICOP, I. P. SPIRIDON, R. I. COMANECI and L.-G. BUJOREANU, Structural effects of high-temperature plastic deformation process on martensite plate morphology in a Fe-Mn-Si-Cr SMA<\/em>, prezentare oral\u0103<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2013, 27-29 Iunie, Sinaia, Romania.<\/li>\n
    14. -L. Paraschiv, F. Borza, N. Lupu, M.-G. Suru, N. M. Lohan, B. Pricop, I.-P. Spiridon, E. Mihalache, R.I. Com\u0103neci, L.-G. Bujoreanu, On the pseudoelastic response of iron-base shape memory alloys<\/em>, prezentare oral\u0103<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2013, 27-29 Iunie, Sinaia, Romania.<\/li>\n
    15. Gur\u0103u, C. Gur\u0103u, F. M. Braz Fernandes, L. G. Bujoreanu, An experimental study on the response of equal channel angular pressed aluminum subjected to cold rolling<\/em>, prezentare oral\u0103<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2013, 27-29 Iunie, Sinaia, Romania.<\/li>\n
    16. Pricop, U. S\u00f6yler, B. \u00d6zkal, M.G. Suru, N.M. Lohan, R.I. Com\u0103neci, N. Cimpoe\u0219u, V.Mu\u0219at, G. Gur\u0103u, B. Istrate, E. Mihalache, L.G. Bujoreanu, A study of martensite formation in powder metallurgy Fe-Mn-Si-Cr-Ni shape memory alloys<\/em>, prezentare oral\u0103<\/em><\/strong>, 9.07.2014, 12:20-12:40, \u00een sec\u021biunea V, Novel Shape Memory Alloys la International Conference on Martensitic Transformations ICOMAT 2014, July, 6-11, 2014, Bilbao, Spain.<\/li>\n
    17. Gheorghe Gurau, Carmela Gurau, Francisco Manuel Braz Fernandes, Leandru Gheorghe Bujoreanu, Effect of High Speed High Pressure Torsion parameters on grain refinement of cone shaped Fe based Shape Memory Alloy active elements<\/em>, prezentare sub form\u0103 de poster, T8-P.05, 10.07.2014, 16:30-18:30, \u00een sec\u021biunea VIII, Thin Films and Nano-scale behaviour, prezentare sub form\u0103 de poster<\/em><\/strong> la International Conference on Martensitic Transformations ICOMAT 2014, July, 6-11, 2014, Bilbao, Spain.<\/li>\n
    18. Carmela Gurau, Gheorghe Gurau, Leandru Gheorghe Bujoreanu, Francisco Manuel Braz Fernandes, A comparative study of NiTi and Fe based shape memory alloys after severe plastic deformation<\/em>, prezentare sub form\u0103 de poster, T8-P.15, 10.07.2014, 16:30-18:30, \u00een sec\u021biunea VIII, Thin Films and Nano-scale behaviour, prezentare sub form\u0103 de poster<\/em><\/strong> la International Conference on Martensitic Transformations ICOMAT 2014, July, 6-11, 2014, Bilbao, Spain.<\/li>\n
    19. Marius-Gabriel Suru, Costica Morosanu, Radu-Ioachim Comaneci, I.P. Spiridon, Leandru-Gheorghe Bujoreanu, Comparative evolution of surface relieves of stress-induced martensite plates in shape memory alloys with different crystalline structures<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong>, T9-P.17, 10.07.2014, 16:30-18:30, \u00een sec\u021biunea IX: Novel characterization and testing approach, de la International Conference on Martensitic Transformations ICOMAT 2014, July, 6-11, 2014, Bilbao, Spain.<\/li>\n
    20. G. Bujoreanu, R.I. Com\u0103neci, G. Gur\u0103u, N.M.Lohan, M. G. Suru, B. Pricop, V. Goan\u021b\u0103, V. Mu\u0219at, B. Istrate, E. Mihalache, Thermomechanical training effects of multifunctional modules, processed by High Speed High Pressure Torsion, when subjected to compression loading-unloading cycles<\/em>, prezentare oral\u0103 ca Invited Speaker<\/em><\/strong>, 14.07.2014, Modern Technologies in Industrial Engineering, ModTech 2014, July 13-16, Gliwice, Poland.<\/li>\n
    21. Gurau, P. Alexanu, L. Gurau, V. Musat, A comparison of the structure and properties of HSLA steel cold rolled and severe plastic deformed by high speed high pressure torsion, DOI: 10.5593\/SGEM2014\/B61\/S24.001, prezentare sub form\u0103 de poster<\/em><\/strong> la International Multidisciplinary Scientific GeoConference, SGEM 2014, 19-25.06.2014, Albena, Bulgaria.<\/li>\n
    22. Gheorghe Gurau, Carmela Gurau, Leandru-Gheorghe Bujoreanu, Francisco Manuel Braz Fernandes, High speed high pressure torsion effects on a difficult deformable shape memory alloy, DOI: 10.5593\/SGEM2014\/B61\/S24.013, prezentare sub form\u0103 de poster<\/em><\/strong> la International Multidisciplinary Scientific GeoConference, SGEM 2014, 19-25.06.2014, Albena, Bulgaria.<\/li>\n
    23. Gurau, G. Gurau, F. M. B. Fernandes, Effect of severe ausforming on the shape memory microstructure of a copper based alloy, DOI: 10.5593\/SGEM2014\/B61\/S24.009, prezentare sub form\u0103 de poster<\/em><\/strong> la International Multidisciplinary Scientific GeoConference, SGEM 2014, 19-25.06.2014, Albena, Bulgaria.<\/li>\n
    24. Carmela Gurau, Gheorghe Gurau, Florentina Potecasu, The long term corrosion behavior of a shape memory alloy in seawater subjected to various plastic deformation processes, DOI: 10.5593\/SGEM2014\/B61\/S24.024 prezentare sub form\u0103 de poster<\/em><\/strong> la International Multidisciplinary Scientific GeoConference, SGEM 2014, 19-25.06.2014, Albena, Bulgaria.<\/li>\n
    25. Leandru-Gheorghe Bujoreanu, Gheorghe Gurau, Radu-Ioachim Comaneci, Burak \u00d6zkal, Elena Mihalache, Particular Aspects of Constrained Recovery Shape Memory Effect in a Severely Plastic Deformed Fe-Mn-Si-Cr Alloy<\/em>, prezentare oral\u0103<\/em><\/strong>, 12.09.2014, 14:10-14:30, \u00een sec\u021biunea MATERIALS CHARACTERIZATION de la 17th International Metallurgy and Materials Congress, IMMC 2014, 11-13 September, 2014, Istanbul, Turkey.<\/li>\n
    26. G. Bujoreanu, Development of shape memory and superelastic applications of some experimental alloys<\/em>, prezentare oral\u0103<\/em><\/strong>, II.O.19, 05.03.2015, Sec\u021biunea II de la 9th International Conference on Materials Science & Engineering, BRAMAT 2015, 5 \u2013 7 March 2015, Bra\u0219ov, Rom\u00e2nia.<\/li>\n
    27. GURAU Gheorghe, BUJOREANU Leandru-Gheorghe, POTECA\u0218U Octavian, C\u0102N\u0102N\u0102U Nicolae, ALEXANDRU Petric\u0103, GUR\u0102U Carmela, T\u0102NASE Dinel, Procedeu \u0219i ma\u0219in\u0103 pentru deformarea prin torsiune la presiune \u00eenalt\u0103 a elementelor active cu form\u0103 tronconic\u0103 din aliaje cu memoria formei<\/em>, Cerere de brevet de inven\u021bie nr. 351\/ 2013, medalie de aur<\/em><\/strong> la Salonul Interna\u021bional de Inventic\u0103 PRO INVENT 2015, 25-27.03.2015, Cluj-Napoca, Rom\u00e2nia.<\/li>\n
    28. Mihalache, B. Pricop, N.-M. Lohan, M.-G. Suru, B. Ozkal, L.-G. Bujoreanu, Dynamic-Mechanical Analysis of Mechanically Alloyed Fe-Mn-Si-Cr-Ni Shape Memory Alloy<\/em>, prezentare oral\u0103<\/em><\/strong> ID 10, 7.05.2015, la High Temperature Shape Memory Alloys, HTSMAs 2015, 5-8.05.2015, Wildbad Kreuth, Germania.<\/li>\n
    29. Leandru-Gheorghe BUJOREANU, Gheorghe GURAU, Ioan DAN, Cristel \u0218TIRBU, Radu-Ioachim COM\u0102MECI, Nicoleta Monica LOHAN, Bogdan PRICOP, Elena MIHALACHE, Marius-Gabriel SURU, Carmela GUR\u0102U, Modular system of multifunctional elements with self-adapting displacement<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la 7th European Exhibition of Creativity and Innovation, EUROINVENT 2015, 14-16.05.2015, Ia\u0219i<\/li>\n
    30. Gheorghe Gur\u0103u, Leandru G. Bujoreanu, Carmela Gur\u0103u, Radu I. Com\u0103neci, Nicoleta M. Lohan, Bogdan Pricop, Marius G. Suru, Superelastic-like response obtained at Fe-Mn-Si-Cr shape memory alloys processed by high-speed high pressure torsion<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2015, 17-20 June, 2015, Mamaia, Romania<\/li>\n
    31. Elena Mihalache, Bogdan Pricop, Marius-Gabriel Suru, Nicoleta-Monica Lohan, Radu Ioachim Com\u0103neci, Bogdan Istrate, Burak Ozkal and Leandru-Gheorghe Bujoreanu, Factors influencing martensite transitions in Fe-based shape memory alloys, prezentare oral\u0103<\/em><\/strong> \u00een sec\u021biunea Fe-based alloys, 15.09.2015, 10th European Symposium on Martensitic Transformations, ESOMAT 2015, 14-18.09.2015, Antwerp, Belgia.<\/li>\n
    32. Carmela Gur\u0103u, Gheorghe Gur\u0103u, V. Sampath, V. Mu\u0219at, Effects of HSHPT on the martensitic transformation behavior in an NiTi alloy, prezentare sub form\u0103 de poster<\/em><\/strong>, PP11, Sec\u021biunea PS1: Ni-Ti-based alloys, 10th European Symposium on Martensitic Transformations, ESOMAT 2015, 14-18.09.2015, Antwerp, Belgia.<\/li>\n
    33. Gheorghe Gur\u0103u, Carmela Gur\u0103u, V. Sampath, Investigation of microhardness evolution in an ultrafine grained NiTi Alloy formed via High Speed High Pressure Torsion (HSHPT), prezentare sub form\u0103 de poster<\/em><\/strong>, PP21, Sec\u021biunea PS1: Ni-Ti-based alloys, 10th European Symposium on Martensitic Transformations, ESOMAT 2015, 14-18.09.2015, Antwerp, Belgia.<\/li>\n
    34. Leandru-Gheorghe Bujoreanu, Viorel Goan\u021b\u0103, Nicanor Cimpoe\u0219u, Carmela Gur\u0103u, Marius-Gabriel Suru, Elena Mihalache and Gheorghe Gur\u0103u, Hardness-gradient reversion in FeMnSiCr shape memory alloy modules produced by high-speed high pressure torsion, prezentare sub form\u0103 de poster<\/em><\/strong>, PP74, Sec\u021biunea PS4: Fe-based alloys, 10th European Symposium on Martensitic Transformations, ESOMAT 2015, 14-18.09.2015, Antwerp, Belgia.<\/li>\n
    35. Leandru-Gheorghe BUJOREANU, Gheorghe GURAU, Ioan DAN, Cristel \u0218TIRBU, Radu-Ioachim COM\u0102MECI, Nicoleta Monica LOHAN, Bogdan PRICOP, Elena MIHALACHE, Marius-Gabriel SURU, Carmela GUR\u0102U, Sistem modular de elemente multifunc\u021bionale cu deplasare auto-adaptiv\u0103; medalie de argint<\/em><\/strong>, la A II-a Edi\u021bie a Salonului Cercet\u0103rii \u0219i Inov\u0103rii, UGAL INVENT 2015, 7-9 octombrie 2015, Gala\u021bi, Rom\u00e2nia<\/li>\n
    36. Mihalache, B. Pricop, N. M. Lohan, M. G. Suru, B. Ozkal, L. G. Bujoreanu, Internal friction evaluation in mechanically alloyedpowder metallurgy Fe-Mn-Si-Cr-Ni shape memory alloys<\/em>, prezentare sub form\u0103 de poster<\/em><\/strong> la Modern Technologies in Industrial Engineering, ModTech 2016, 15-18 iunie 2016, Ia\u0219i, Romania<\/li>\n<\/ol>\n

       <\/p>\n

      Brevete<\/i><\/b><\/h2>\n

       <\/p>\n

        \n
      1. GURAU Gheorghe, BUJOREANU Leandru-Gheorghe, POTECA\u0218U Octavian, C\u0102N\u0102N\u0102U Nicolae, ALEXANDRU Petric\u0103, GUR\u0102U Carmela, T\u0102NASE Dinel, Procedeu \u0219i ma\u0219in\u0103 pentru deformarea prin torsiune la presiune \u00eenalt\u0103 a elementelor active cu form\u0103 tronconic\u0103 din aliaje cu memoria formei, Cerere de brevet de inven\u021bie nr. 351\/ 2013<\/li>\n
      2. Leandru-Gheorghe BUJOREANU, Gheorghe GURAU, Ioan DAN, Cristel \u0218TIRBU, Radu-Ioachim COM\u0102MECI, Nicoleta Monica LOHAN, Bogdan PRICOP, Adrian-Liviu PARASCHIV, Marius-Gabriel SURU, Carmela GUR\u0102U, Element multifunc\u021bional cu deplasare auto-adaptiv\u0103, dintr-un aliaj Fe-Mn-Si-Cr cu memoria formei, Cerere de brevet de inven\u021bie nr. 374\/ 2013<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

        Articole publicate   Bogdan Pricop, Umut S\u00f6yler, Burak \u00d6zkal, Nicoleta Monica Lohan, Adrian Liviu Paraschiv, Marius Gabriel Suru and Leandru-Gheorghe Bujoreanu, Influence of mechanical alloying on the behavior of Fe-Mn-Si-Cr-Ni shape memory alloys made by powder metallurgy, Materials Science Forum Vols. 738-739 (2013) pp 237-241, ISSN 1662-9752, FACTOR DE IMPACT (FI): 0,399 P. SPIRIDON, B. […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":5,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/pages\/338"}],"collection":[{"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=338"}],"version-history":[{"count":20,"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/pages\/338\/revisions"}],"predecessor-version":[{"id":654,"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=\/wp\/v2\/pages\/338\/revisions\/654"}],"wp:attachment":[{"href":"http:\/\/www.pcca-2011-3.1-0174.sim.tuiasi.ro\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=338"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}